| Uploader: | Kejin |
| Date Added: | 21 June 2008 |
| File Size: | 51.8 Mb |
| Operating Systems: | Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X |
| Downloads: | 21411 |
| Price: | Free* [*Free Regsitration Required] |
To continue using , please upgrade your browser.
Posted on Aug 11, Be the first to answer. This resistor was blown out. The subwoofer's test tone will be a lower frequency than that of the center. Move your cables and check to see that they are making a good connection. This plug is inserted into the left front jack with the brown color marking located at the atec of the subwoofer. Sound source is distorted. Front speaker placement Because placement of your satellite speakers is important for sound quality, the acoustic response of the satellites was carefully lanskng with typical desk, monitor and keyboard configurations.
If the distance is greater than 5 ft 1. See "Replacing the fuse. This test is usually performed when qltec sound is detected from the speakers, and after all other solutions have been tried in the "Table of problems, possible causes and solutions. Later, these standards were extended to encompass Home Theater systems and recently adapted to the specialized needs of multi-channel surround reproduction from movies and games, on DVD, played back on a Lwnsing multimedia system.
Opens up the speaker controls software from which you can access the other speaker controls not available on the keyboard. Make sure each color coded plug orange for Right Front speaker, brown for Left Front speaker is fully inserted. To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
Open the speaker controls software and use the graphic equalizer to boost the high frequencies. Computer not sending out signal Use the diagnostic feature to determine that the tone is heard through all speakers.
Vertical stand for center speaker: Posted on Mar 03, Be the first to answer. A spare fuse is included with your system. Answered on Dec 21, Sound card setting eliminates center channel. Move the altfc cord from the power surge protector if applicable and plug directly into an AC wall outlet.
Use the triple input cable found at the back of the subwoofer. Wall outlet not functioning Plug another device into the wall outlet same jack to insure it is functioning, or, try plugging the ADA speaker system into a different outlet. It is recommended that the satellites be placed on the left and right side of the monitor. Subwoofer Level control The Subwoofer Level rotary control is located at the rear of the subwoofer. Please assign your manual to a product: In addition, excellent results are obtained when the surround speakers are in line with, and slightly above the listener's ears.
The subwoofer, the Right Front satellite and the Left Front satellite will each sound a test tone at the same time.
Dell Altec Lansing Ada995 5.1 THX Certified Computer Speakers
Answered on Mar 22, There is a design flaw where the board gets corroded due to the fact they caulked or glued it togther and left some of the circuit board hanging out. Posted on May 08, Be the first to answer.
You may wish to refer to the Quick Start Guide included with your system for an overview of the connections detailed below. If your desk is centered lxnsing the middle of a wall, it is recommended that you place the subwoofer alongside that same wall.
Be sure to check the DVD's Language menu and if a 5.
Posted on Jan 11, Be the first to answer.
Comments
Post a Comment